被黑人伦流澡到高潮hnp动漫,亚洲av色香蕉一区二区三区,国产做a爰片久久毛片a片美国,gogo人体gogo西西大尺度高清

18123966210

product

產品中心

當前位置:首頁產品中心Ossila英國Ossila材料M261/PTB7-Th/PBDTTT-EFT/英國Ossila材料PCE10

英國Ossila材料M261/PTB7-Th/PBDTTT-EFT/英國Ossila材料PCE10

產品簡介:英國Ossila材料M261/PTB7-Th/PBDTTT-EFT/英國Ossila材料PCE10
英國Ossila代理、廠家直接訂貨、原裝正品、交期準時、洽談?。。?/p>

產品型號:

更新時間:2025-03-31

廠商性質:代理商

訪問量:9618

服務熱線

0755-23003036

立即咨詢
產品介紹

只用于動物實驗研究等

Batch details

Batch numberMWPDIStock info
M261> 40,0001.8-2.0In stock

英國Ossila材料M261/PTB7-Th/PBDTTT-EFT/英國Ossila材料PCE10

General Information

Full namePoly[4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)benzo[1,2-b;4,5-b']dithiophene-2,6-diyl-alt-(4-(2-ethylhexyl)-3-fluorothieno[3,4-b]thiophene-)-2-carboxylate-2-6-diyl)]
SynonymsPCE10 / PBDTTT-EFT / PTB7-Th
Chemical formula(C49H57FO2S6)n
CAS number1469791-66-9
HOMO / LUMOHOMO = 5.24 eV, LUMO = 3.66 eV [1]
Opticalλmax = 720 nm; λedge = 785 nm; Eg (optical) = 1.58 eV
Classification / Family

Thienothiophene, Benzodithiophene, Heterocyclic five-membered ring, Organic semiconducting materials, Low band gap polymers, Organic Photovoltaics, Polymer Solar Cells

Applications

PCE10 (PTB7-Th, PBDTTT-EFT) is one of the new generation of OPV donor polymers that could deliver on the heralded 10/10 target of 10% efficiency and 10 years lifetime. Brand new to the Ossila catalogue, this material is already showing impressive potential with in excess of 9% efficiency reported in the literature and over 7% produced when using large area deposition processes in air with a standard architecture [1,2]. In our own labs we have achieved efficiencies of over 9%.

The advantages of PCE10 are that not only does the material lower HOMO/LUMO levels and increase the efficiencies compared to PTB7, but more significantly it is also far more stable. Early indications are that it can be handled under ambient conditions without issues, suggesting that we can look forward to measuring the long term lifetime of the devices.

PCE10 is one of the most exciting materials to have made it out of the labs in recent years and offers huge potential for more in depth research. We'll be working hard over the next few months to maximise efficiencies by optimising the device architecture, and we will provide further results as we do so. In the mean time, our current fabrication routine is below, and should you have any further questions or queries please contact us.

Usage Details

Reference Devices

Reference devices were made on batch M261 to assess the effect of PBDTTT-EFT:PC70BM active layer thickness on OPV efficiency with the below structure. These were fabricated under inert atmosphere (N2glovebox) before encapsulation and measurement under ambient conditions.

Glass / ITO (100 nm) / PEDOT:PSS (30 nm) / PBDTTT-EFT:PC70BM (1:1.5) / Ca (5 nm) / Al (100 nm)

For generic details please see the fabrication guide and video. For specific details please see the below condensed fabrication report which details the optical modelling and optimisation of the multilayer stack.

The PBDTTT-EFT:PC70BM solution was made in chlorobenzene at 35 mg/ml before being diluted with 3% diiodooctane (DIO) to promote the correct morphology.

Active layer thicknesses were achieved from spincasting the film at spin speeds of 2000, 2700, 3900 and 6000 rpm for 30s. Additionally, a methanol wash was performed for all devices to help remove the DIO additive. For each of these spin speeds a total of 2 substrates (3 in the case of 2700 rpm) was produced, each with 8 pixels and the data presented below represents a non-subjective (no human intervention) analysis of the best 75% of pixels by PCE (18 pixels for 2700 rpm condition, 12 pixels for each other).

Overall, the average efficiency of 8.30% PCE (9.01% maximum) was found from a 2700 rpm spin speed.

ote on effect of epoxy: Due to the very high solubility of the PBDTTT-EFT it was noted during fabrication that the film changed colour when in contact with the encapsulation epoxy in liquid form for extended periods indicating that there was some miscibility. Inspection of the active areas underneath the top cathode indicated that the epoxy had not seeped into the active area before curing and device metrics indicate that this did not appear to affect performance. However, we would recommend minimising contact time between the epoxy and PBDTTT-EFT films before UV curing.

英國Ossila材料M261/PTB7-Th/PBDTTT-EFT/英國Ossila材料PCE10

Condensed Fabrication Routine

Substrates and cleaning

  • Edgeless 8 pixel substrates (S211)
  • 5 minutes sonication in hot 10% NaOH solution
  • 1x boiling DI dump rinse, 1x cold dump rinse
  • 5 minutes sonication in hot 1% Hellmanex III
  • 2x boiling DI rinses, DI
  • 5 minutes sonication in warm IPA
  • 1x boiling DI dump rinse, 1x cold dump rinse
  • N2 blow dry
  • Substrates held on a hotplate at 120°C before spin-coating the hole transport layer (no further cleaning or surface treatment required)

PEDOT:PSS

  • PEDOT:PSS (AI4083) filtered through a 0.45 µm PVDF filter
  • Spin on heated substrates at 6000 rpm for 30s
  • Bake at 120°C after spincast
  • Cathode strip wipe with DI, replaced back on hotplate until transfer to glovebox
  • Additional bake in the glovebox for 30 mins to remove residual moisture

Active Layer Solution

  • Fresh stock solutions of PBDTTT-EFT (M261) made at a concentration 14 mg/ml in anhydrous CB and dissolved at 70°C for 1.5 hours
  • Mixed with dry Ossila 95% C70 PCBM at a blend ratio of 1:1.5 to make an overall solution concentration of 35 mg/ml
  • Mixed in 3% DIO and then heated the solution at 70°C with a stirbar for 2 hours
  • Cooled prior to spincasting

Active layer test films

  • Test film spun at 2000 rpm for 30s using unfiltered solution with a methanol wash before measuring with a Dektak surface profiler
  • Reference film displayed a thickness of 140 nm

Active layers

  • Devices spun using 30 µl dynamic dispense for 30s
  • Methanol wash was then immediay performed as a secondary spin step, 20 µl at 4000 rpm for 30 seconds
  • Cathode wiped with CB

Evaporation

Left in vacuum chamber overnight and evaporated with the below parameters.

  • 5 nm Ca at 0.2 ?/s
  • 100 nm Al at 1.5 ?/s
  • Deposition pressure

Encapsulation

  • As standard using Ossila EE1, 30 mins UV in MEGA LV101

Measurements

  • JV sweeps taken with Keithley 237 source-meter
  • Illumination by Newport Oriel 9225-1000 solar simulator with 100 mW/cm2 AM1.5 output
  • NREL certified silicon reference cell used to calibrate
  • Lamp current: 7.8 A
  • Solar output at start of testing: 1.00 suns at 23°C
  • Solar output at end of testing: 1.00 suns at 25°C
  • Air cooled substrates
  • Room temperature at start of testing : 25°C
  • Room temperature at end of testing: 25°C
  • No aperture mask, pixel size: 0.4 mm2

 

To the best of our knowledge the technical information provided here is accurate. However, Ossila assume no liability for the accuracy of this information. The values provided here are typical at the time of manufacture and may vary over time and from batch to batch.

References

Please note that Ossila has no formal connection to any of the authors or institutions in these references):

  1. Side Chain Selection for Designing Highly Efficient Photovoltaic Polymers with 2D-Conjugated Structure, S. Zhang et al., Macromolecules, 47, 4653-4659 (2014)
  2. Highly Efficient 2D-Conjugated Benzodithiophene-Based Photovoltaic Polymer with Linear Alkylthio Side Chain?, L. Ye et al., Chemistry of Materials., 26, 3603-3605 (2014)
在線留言

留言框

  • 產品:

  • 您的單位:

  • 您的姓名:

  • 聯系電話:

  • 常用郵箱:

  • 省份:

  • 詳細地址:

  • 補充說明:

  • 驗證碼:

    請輸入計算結果(填寫阿拉伯?dāng)?shù)字),如:三加四=7

服務熱線
18123966210

掃碼加微信

久久久久国产精品嫩草影院 | 东北老女人高潮大叫对白 | 男男做爰猛烈高潮在线观看| 综影视之被各种男人啪h| 亚洲gv猛男gv无码男同| 亚洲日韩精品无码av海量| 亚洲AV无码国产精品永久一区 | 亚洲日韩国产精品乱-久 | 妺妺窝人体色www聚色窝仙踪| 狠狠综合久久av一区二区| 欲妇荡岳丰满少妇a片24小时| 亚洲av无码一区二区乱子仑| 免费60分钟床| 丰满女老板bd高清a片| 无码人妻精品一区二区三区东京热| 夜月直播视频直播免费观看| 老师真嫩真紧好爽20p| 亚洲国产成人精品无码区花野真一| 成熟丰满熟妇高潮xxxxx视频| 老板含着她的花蒂啃咬高潮的视频| 九九热这里只有精品视频| 少妇多水xxxx色情免费| 大香伊人久久精品一区二区| 麻豆传媒官网入口| 少妇人妻系列1~100| 米奇777四色精品人人爽| 无码av一区二区三区| 免费观看全黄做爰的视频| 色欲av午夜一区二区三区| 人妻丰满熟妇无码区免费| 狼色精品人妻在线视频网站| 久久精品国产亚洲一区二区 | 亚洲色欲色欲www| 黑色包臀裙秘书啪啪久久网站| 国产又粗又猛又爽又黄| 午夜福利麻豆国产精品| 三妻四妾免费观看完整版高清| 我的邻居是bj无删减漫画免费看| 欧美老熟妇欲乱高清视频| 8X福利精品第一导航| 87福利电影网|